Polyester 60" Pleated High Temperature High Flow Filter 120℃ Petrochemical
General Description
PHFLH Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body is Polyester pleated. End caps and filter layer using thermal melting welding, no any bonding agent, with a wide range of chemical compatibility. High temperature resistance, widely used in high temperature conditions.
Application:
General purpose: RO Prefiltration, Seawater desalination RO pre-treatment;
Power generation: Condensate re-circulation, Hot water recovery, Supplementary water, Coolant;
Food and Beverage: Bottled water, High Fructose, Edible oil, Soft drinks, and milk, Potable water;
Petrochemical: Various solvents, Ink, plating fluids, Paints and coatings, Refineries
Product Features:
* Single cartridge could achieve flow rate 110m3/h
* Filtration systems are 50% smaller than typical size system
* Inside to outside flow direction keeps all of the contamination catched.
Performance Specifications
Dimensions(nominal)
|
OD
|
6” (152mm)
|
|
Length
|
20"/40"/60"
|
Material of Construction:
|
Model
|
Filter Media
|
Support/Drainage
|
End Caps
|
Seals Material
|
|
PHFLH
|
Polyester
|
Polyester
|
Glass Fiber Reinforced Polypropylene
|
NBR, EPDM, Silicone, Viton
|
Filter Performance
|
Micron
|
1um, 5um, 10um, 15um, 20um, 40um, 70um, 100um
|
|
Maximum operating temperature:
|
Pleated polyester: 121℃
|
|
Maximum operating differential pressure
(Inside to outside flow direction)
|
Pleated polyester: 3.44bar@121℃
|
|
Suggestion pressure for filter replacement
|
2.5Bar@20℃
|
|
Max. flow rate
|
40": 70m3/h
|
|
60": 110m3/h
|
Product Tags:
|
|
Polyester 60" High Temperature Water Filter 120℃ Petrochemical OD 152mm Images
|
